Extension element 10/50 mm

Abutment without special adhesive

Abutment without special adhesive
Preview: Abutment without special adhesive
Abutment without special adhesive
  • 1261-11
  • 4013456151116
  • for fitting of overhead one-gang junction boxes at greater heights
  • for fixing to formworks
Dispatch
50
Product information

Extension element 10/50 mm

Extension element for bridging wall thicknesses and supporting one-gang boxes during installation on the opposing formwork. Bridging of up to 100 mm (plus box dimensions) can be underpinned securely in increments of 10 or 50 mm.

  • For installation of overhead one-gang junction boxes
  • Fitting height: vertical 50 mm, horizontal 10 mm
  • can be attached to one-gang junction boxes or abutment using push-stud conduit connector
  • Clip the connector into place, insert the conduit into the connector.

Processing instructions

Connected crossways, the elements provide stable and non-distorting support.

A wide range of possibilities for adjusting the installation height.

Different installation heights can be created in 10 mm or 50 mm increments.

The abutment is required as an initial element on the switch table for overhead boxes and can be connected to extension elements and one-gang junction boxes.

Download
Product data sheet

Abutment without special adhesive

Article no: 1261-11

Download
Brochure

Electrical installation in on-site mixed concrete and as part of the 3D concrete printing process.

Boxes, housings and systems.

55 MB | 2024-09-03

Brochure

Electrical installation in concrete construction precast concrete production and prefabricated room modules.

Boxes, housings and systems.

5.3 MB | 2024-02-28