Results filtered according to:
No results were found for the filter!
Junction casing 105 x 105 x 53 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 105 mm
Width: 105 mm
Depth: 53 mm
Junction casing 105 x 105 x 53 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 105 mm
Width: 105 mm
Depth: 53 mm
Junction casing 165 x 165 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 165 mm
Width: 165 mm
Depth: 72 mm
Junction casing 165 x 165 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 165 mm
Width: 165 mm
Depth: 72 mm
Junction casing 240 x 140 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 240 mm
Width: 140 mm
Depth: 72 mm
Junction casing 240 x 140 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 240 mm
Width: 140 mm
Depth: 72 mm
Junction casing 235 x 205 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 235 mm
Width: 205 mm
Depth: 72 mm
Junction casing 235 x 205 x 72 mm
- for installation: DIN terminal strips, TS 35 standard rails for terminal strips, etc., terminal blocks up to 16 mm²
- with drilling template (supplied)
- including cover
Length: 235 mm
Width: 205 mm
Depth: 72 mm
Junction box Ø 120 mm
- receptacle for TS 35 standard rail
- Make cut hole with Variocut 1089-00 in fully extended position or bi-metallic cutter 1082-20
- including cover
Depth: 65 mm
Cut hole Ø: 120 mm
Break-out openings Ø 20 mm: 4
Junction box Ø 120 mm
- receptacle for TS 35 standard rail
- Make cut hole with Variocut 1089-00 in fully extended position or bi-metallic cutter 1082-20
- including cover
Depth: 65 mm
Cut hole Ø: 120 mm
Break-out openings Ø 20 mm: 4
Potential equalisation casing 10²
- for bathrooms or similar
- with potential equalisation rail, protected against corrosion
- with 4 screw domes
- With Ø 3.2 x 15 mm cover screws
- including cover
Length: 105 mm
Width: 105 mm
Depth: 53 mm
Replacement cover
- flat cover edge
- surface roughened
- countersunk for screw heads
For Art. No.: 9073-01/-91