International products

Choice of category
Main category
Sub-category
Filtering
Exit opening Ø
  •   Exit opening Ø:
Length
  •   Length:
  •   Length:
  •   Length:
  •   Length:
  •   Length:
Width
  •   Width:
  •   Width:
  •   Width:
  •   Width:
  •   Width:
Depth
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
Installation type
  •   Installation type:
Field of application
  •   Field of application:
Results filtered according to:
1 From 2
Results filtered according to:
No results were found for the filter!
One-gang box for British accessories, one-gang
One-gang box for British accessories, one-gang
  • Accessories can be aligned at any time by using to M 3.5 slide nuts
  • Certified according to BS 4662 standard
Article no: 1223-41
Length: 89 mm Width: 89 mm Depth: 60 mm
One-gang box for British accessories, two-gang
One-gang box for British accessories, two-gang
  • Accessories can be aligned at any time by using to M 3.5 slide nuts
  • Certified according to BS 4662 standard
Article no: 1224-41
Length: 149 mm Width: 89 mm Depth: 60 mm
Slide nuts for British accessories
Slide nuts for British accessories
  • 2 pieces required per one-gang box
  • for clipping into one-gang boxes 1223-41/1224-41
  • protected against corrosion
Article no: 1224-99
B¹ one-gang box Italian standard with 3 modules
B¹ one-gang box Italian standard with 3 modules
  • For 3 modules in monoblock construction
  • Suitable for all types of formwork
  • 2-piece with moulded rear part
  • Two slots for B¹ Prefix® system wings
  • Rear part of box with slot for support element
  • Suitable for American accessories
Article no: 1269-03
Length: 160 mm Width: 75 mm Depth: 91 mm
B¹ one-gang box Italian standard with 4 modules
B¹ one-gang box Italian standard with 4 modules
  • For 4 modules in monoblock construction
  • suitable for all types of form-work
  • 2-piece with moulded rear part
  • Two slots for B¹ Prefix® system wings
  • Rear part of box with slot for support element
Article no: 1269-04
Length: 160 mm Width: 75 mm Depth: 91 mm
One-gang box for Italian and American accessories
One-gang box for Italian and American accessories
  • For 3 modules in monoblock construction (single row)
  • Installation opening 60 x 90 mm
Article no: 1200-00
Length: 100 mm Width: 68 mm Depth: 55 mm
Inlet casing 2x1
Inlet casing 2x1
International products
  • compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
Article no: 9902.22
Length: 137 mm Width: 77 mm Depth: 70 mm
Inlet casing 3x1
Inlet casing 3x1
International products
  • compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
Article no: 9902.23
Length: 197 mm Width: 77 mm Depth: 70 mm
Inlet casing 4x1
Inlet casing 4x1
International products
  • compatible with Feller SNAPFIX®
  • Nail domes also serve as Prefix® connection points
  • Increased stability
  • Separately guided nailing points
  • With separator wall and stabilisation lid
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
Article no: 9902.24.40
Length: 257 mm Width: 77 mm Depth: 70 mm
Prefix® wing set, 4 pieces for AGRO inlet box 9902.xx
Prefix® wing set, 4 pieces for AGRO inlet box 9902.xx
International products
  • Facilitates fixing to the reinforcement
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Article no: 9940.25
Length: 150.1 mm Width: 59 mm Height: 16 mm
Prefix® wing set, 12 pieces for AGRO inlet box 9902.xx
Prefix® wing set, 12 pieces for AGRO inlet box 9902.xx
International products
  • Facilitates fixing to the reinforcement
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
Article no: 9940.50
Length: 150.1 mm Width: 59 mm Height: 16 mm
Prefix® concrete construction box 1x1 / Ø 30 mm
Prefix® concrete construction box 1x1 / Ø 30 mm
International products
  • compatible with Feller SNAPFIX®
  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
  • Several units can be securely joined together to form norm-compliant combinations
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
Article no: 9940
Exit opening Ø: 30 mm Depth: 97 mm Combination: 1x1
1 From 2