International products

Choice of category
Main category
Sub-category
Filtering
Diameter
  •   Diameter:
Length
  •   Length:
  •   Length:
  •   Length:
  •   Length:
  •   Length:
  •   Length:
Width
  •   Width:
  •   Width:
  •   Width:
  •   Width:
Depth
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
  •   Depth:
Device screws
  •   Device screws:
Installation type
  •   Installation type:
Field of application
  •   Field of application:
  •   Field of application:
Results filtered according to:
1 From 2
Results filtered according to:
No results were found for the filter!
Q-range® one-gang box with 2 device screws, 60 x 60 x 50 mm
Q-range® one-gang box with 2 device screws, 60 x 60 x 50 mm
International products
  • For masonry installation
  • With screw domes
  • Conduit entries on all sides
  • Suitable for 60 / 71 mm combinations
  • Protection class IP 2X
Article no: 7500
Length: 60 mm Width: 60 mm Depth: 50 mm
Q-range® one-gang box with 2 device screws, 60 x 60 x 65 mm
Q-range® one-gang box with 2 device screws, 60 x 60 x 65 mm
International products
  • For masonry installation
  • With screw domes
  • Conduit entries on all sides
  • Suitable for 60 / 71 mm combinations
  • Protection class IP 2X
Article no: 7650
Length: 60 mm Width: 60 mm Depth: 65 mm
Q-range® one-gang box, 60 x 60 x 50 mm
Q-range® one-gang box, 60 x 60 x 50 mm
International products
  • For masonry installation
  • With screw domes
  • Conduit entries on all sides
  • Suitable for 60 / 71 mm combinations
  • Protection class IP 2X
Article no: 7501
Length: 60 mm Width: 60 mm Depth: 50 mm
Q-range® one-gang box, 60 x 60 x 65 mm
Q-range® one-gang box, 60 x 60 x 65 mm
International products
  • For masonry installation
  • With screw domes
  • Conduit entries on all sides
  • Suitable for 60 / 71 mm combinations
  • Protection class IP 2X
Article no: 7651
Length: 60 mm Width: 60 mm Depth: 65 mm
Q-range ECON® one-gang box with 4 screw domes
Q-range ECON® one-gang box with 4 screw domes
International products
  • Air-tight design with sealing membranes
  • Centre distance 60 mm horizontally as well as 71 mm horizontally and vertically
  • 2 x 3 fixed entries, 2 x 2 fixed entries, 4 base entries
Article no: 752
Length: 60 mm Width: 60 mm Depth: 50 mm
Q-up® plaster compensation ring
Q-up® plaster compensation ring
International products
  • Plaster compensation frame with 2 screws 40 mm, Pozidriv drive
  • For boxes which are placed too deeply
Article no: 994
Q-signal® for installation opening 70 x 64 mm
Q-signal® for installation opening 70 x 64 mm
International products
  • Protects the box interior, the screw domes and screw heads during plastering
  • Reusable
Article no: 975
One place back box "the blue one" 59 mm
One place back box "the blue one" 59 mm
International products
  • compatible with Feller SNAPFIX®
  • Suitable for screw or claw fixing of accessories
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
  • With injection-moulded signal cover
  • For assembling combinations, centre distance 60 mm
  • Low-lying plaster grips
Article no: 9921
Depth: 59 mm Diameter: 71 mm Break-out openings Ø 20 mm: 11
Flush mounted combination box "The green one"
Flush mounted combination box "The green one"
International products
  • suitable for screw attachment of equipment
  • to create combinations in both axis directions, centre distance 60 mm
  • with separator wall
Article no: 99.1234
Length: 72 mm Width: 72 mm Depth: 57 mm
Protecting cover suitable for combination box "the green one"
Protecting cover suitable for combination box "the green one"
International products
  • for one-gang box Art. No. 99.1234
Article no: 99.1234.06
Length: 67 mm Width: 67 mm
In-wall back box 115 x 115 x 76 mm, quadratic glow wire tested 850ºC
In-wall back box 115 x 115 x 76 mm, quadratic glow wire tested 850ºC
International products
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available
Article no: 9909.01.850
Length: 115 mm Width: 115 mm Depth: 76 mm
In-wall back box 115 x 115 x 101 mm, quadratic glow wire tested 850ºC
In-wall back box 115 x 115 x 101 mm, quadratic glow wire tested 850ºC
International products
  • Flat bearing surface thanks to 4 support points
  • Voltage transfer is prevented by countersunk screw mounts
  • Essential in timber construction
  • Extension frame for sub-ceiling insulation available
Article no: 9908.01.850
Length: 115 mm Width: 115 mm Depth: 101 mm
1 From 2