Results filtered according to:
No results were found for the filter!
System magnet
- for accurate positioning during automated or manual production
- with an anti-twist device for one-gang boxes
- adhesive force 500 N (50 kg)
- Suitable for the following items:
- HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
- B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
- 115 large slab ceiling box / item no. 1227-16
- End and transition bushes / item no. 1261-82/-83/-84
- Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
System magnet PLUS
- for correct positioning during automated production as well as automated removal and storage
- with an anti-twist device for one-gang boxes
- adhesive force 500 N (50 kg)
- Suitable for the following items:
- HaloX® installation housing / item no. 1282-74/-75/-76 and 1283-74/-76
- B² one-gang junction boxes / item no. 1262-06, 1263-06, 1264-06
- 115 large slab ceiling box / item no. 1227-16
- End and transition bushes / item no. 1261-82/-83/-84
- Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
Magnet
- for clamp attachment in the box
- for anti-shock fixing of one-gang junction boxes in horizontal formwork
- Adhesive force of 900 N
- Magnet remains on the formwork table after formwork removal
- Centering device for correct positioning during automated production
Adhesive foil, double-sided adhesive
- for anti-shock fixing of boxes and casings in horizontal formwork
- for vertical formwork, additional bracing must be provided using a support element and abutments
- Degreasing formwork
- Double-sided adhesion
Conduit connector for DIN EN conduit Ø 20 mm
- for punching out markings without tools
- accepts rigid and flexible DIN EN conduits
DIN EN conduit Ø: 20 mm
Conduit connector for DIN EN conduit Ø 25 mm
- for punching out markings without tools
- accepts rigid and flexible DIN EN conduits
DIN EN conduit Ø: 25 mm
Conduit connector for DIN EN conduit Ø 32 mm
- for punching out markings without tools
- accepts rigid and flexible DIN EN conduits
DIN EN conduit Ø: 32 mm
Conduit connector for DIN EN conduit Ø 40 mm
- for punching out markings without tools
- accepts rigid and flexible DIN EN conduits
DIN EN conduit Ø: 40 mm
Conduit connector 60°
- space-saving entry of conduits in confined spaces, e.g. door and window areas
- for punching out markings without tools
- for fitting flexible DIN EN conduits 25 mm
Distance piece 142
- for connecting to all one-gang junction boxes at 142 mm centre distance
- for separate covering, e.g. low-voltage in combinations with sockets with protection against accidential contact.
- also for overhead boxes
- with push-stud connector for extension elements
Plaster compensation ring
- for latching on the one-gang junction box
- screw distance to equipment attachment 60 mm
- with moulded-in plaster skin to prevent ingress of cleaning material
Height: 14,5 mm
Diameter: 60 mm
Light hook with thread M5, shaft length 105 mm
- For screwing into lamp boxes (EN 60670)
- maximum light hook load according to DIN EN 60670 100 N (10 kg)
- With M5 thread, fully insulated
Length of shank: 105 mm
Diameter hook: 26 mm
Overall length: 132 mm