UP¹ flush-mounting boxes

Choice of category
Main category
Sub-category
Filtering
Depth
  •   Depth:
  •   Depth:
Air-tight
  •   Air-tight:
Installation type
  •   Installation type:
  •   Installation type:
Field of application
  •   Field of application:
  •   Field of application:
Results filtered according to:
Results filtered according to:
No results were found for the filter!
One-gang box UP¹ ECON® Fix
NEW
One-gang box UP¹ ECON® Fix
  • More volume than conventional one-gang boxes
  • Variant with quick fixing for installation without plaster
  • With 4 x 3 screw domes
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
Article no: 1055-26
Depth: 46 mm Drill hole Ø: 82 mm With depth stop: Yes
One-gang junction box UP¹ ECON® Fix
NEW
One-gang junction box UP¹ ECON® Fix
  • More volume than conventional one-gang boxes
  • Variant with quick fixing for installation without plaster
  • with 4 x 3 screw domes and 2 expanding claw fields
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
Article no: 1555-26
Depth: 66 mm Drill hole Ø: 82 mm With depth stop: Yes
Stepless plaster compensation frame UP¹
NEW
Stepless plaster compensation frame UP¹
  • to compensate for deep-seated boxes
  • to maintain IP protection class
  • with 2 fixing screws 40 mm
Article no: 1155-65
Height: 10 - 35 mm Screw spacing: 60 mm Steplessly adjustable: Yes
Signal cover UP¹ for installation openings Ø 60 mm
NEW
Signal cover UP¹ for installation openings Ø 60 mm
  • reusable
  • Protects interior of box, screwing dome and screw heads when plastering
Article no: 1181-65
For installation opening: 60 mm for UP¹ appliance outlets and UP¹ appliance junction boxes: Yes
Flush-mounting gun foam
NEW
Flush-mounting gun foam
  • For additional fixing of the UP¹ ECON® Fix boxes
  • For processing with commercially available PU foam guns with M65 threaded connection
  • Can be used with Art. No. 1055-26 and 1555-26
  • 1-component PU foam
  • Building material class E according to EN 13501 (DIN 4102 B2 quality)
  • Fine-pored foam structure
  • Ambient processing temperature -10°C to +30°C, optimum +20°C, 60% relative humidity (box temperature min. +5°C)
  • Humidity curing
  • Adhesive-free within approx. 10 min
  • Can be cut after approx. 30 min.
  • Fully loadable after approx. 12 h
  • Temperature resistant cured from -40 °C to +80 °C
  • Can be stored up to 12 months
  • see safety data sheet
Article no: 1155-95
Contents: 750 ml