- Toolless conduit connection to the B² one-gang junction boxes
- Accepts rigid and flexible conduits
- Damping of conduit vibrations during the compaction process
- Prevents the conduits penetrating the one-gang junction box and thus prevents conduits from being shortened later on
- Easy cable pull-in thanks to optimised 90° conduit elbow
- space-saving entry of conduits in confined spaces, e.g. door and window areas
- for punching out markings without tools
- for fitting flexible 25 mm DIN EN conduits
- for anti-shock fixing of boxes and casings in horizontal formwork
- for vertical formwork, additional bracing must be provided using a support element and abutments
- Degreasing formwork
- Double-sided adhesion
- for connecting to all one-gang junction boxes at 142 mm centre distance
- for separate covering, e.g. low-voltage in combinations with sockets without electric shock protection
- also for overhead boxes
- with push-button connection for extension elements
- for latching on the one-gang junction box
- screw distance to accessory fixing 60 mm
- with moulded-in plaster skin to prevent ingress of cleaning material
- For retrofitting in ceiling boxes (EN 60670)
- maximum light hook load according to DIN EN 60670 100 N (10 kg)
- with M5 thread, fully insulated
- For retrofitting in ceiling boxes (EN 60670)
- maximum light hook load according to DIN EN 60670 100 N (10 kg)
- with M5 thread, fully insulated
- For retrofitting in ceiling boxes (EN 60670)
- maximum light hook load according to DIN EN 60670 100 N (10 kg)
- with M5 thread, fully insulated
- For electrical installations on the opposing formwork side.
- Facilitates fixing to the reinforcement
- Adjustable to concrete ceilings 20, 25, 30 or 35
- Pre-fixing by means of Prefix® installation technology
- Can be used for the following articles:
- End and transition bushes / item no. 1261-82/-83/-84
- Wall and ceiling transitions 30° / item no. 1261-92/-93/-94
- Wall and ceiling transitions 90° / item no. 1261-95/-96/-97
- for installation of overhead B² one-gang junction boxes
- Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
- Standardised combination distance 71 mm
- Can be used for the following articles:
- B² one-gang junction boxes / Art. No. 1262-XX, 1263-XX, 1264-XX
- 10 – 50 mm extension element / Art. No. 1261-10
- Universal extension elements / Art. no. 1261-08/-09
- Flat 45 one-gang box / Art. No. 1256-01
- Flat 45 one-gang junction box / Art. No. 1266-01
- Flat 45 wall light connection box / Art. No. 1246-01
- Can be combined with the following items:
- B² one-gang junction box / Art. No. 1262-XX, 1263-XX, 1264-XX
- B² distance piece 142 / Art. No. 1261-18
- for fitting of overhead one-gang junction boxes at greater heights
- can be attached to one-gang junction boxes or abutment using push-stud conduit connector
- for fitting of overhead one-gang junction boxes at greater heights
- for fixing to formworks