Spacer

Spacer

Spacer
Preview: Spacer
Spacer
  • 9310-10
  • 4013456551091
  • for installation in insulated hollow ceilings
  • retrofitting from below
  • toolless mounting
  • For Ø 68 – 80 mm installation openings
  • height adjustable from 100 – 40 mm
Depth
100 - 40 mm
installation from front, cut hole Ø
68 - 80 mm
max. installation depth for the LED luminaires
95 mm
max. ceiling exit (DA) Ø
80 mm
Cable entries max.
4
Dispatch
10
Product information

Spacer

The spacer for the installation of swivelling built-in halogen and LED luminaires in various ceiling constructions. The housing ensures the necessary distance between the luminaire and the surrounding material. In this way, materials such as the moisture barrier and insulation are efficiently protected against the luminaire’s high operating temperatures. This protective measure can be provided for both new buildings and retrofitting work. The housing is suitable for installation diameters between 68 and 80 mm, and can be adapted for use with different installation heights from 40 to 100 mm. After installation, the spacer stands securely on the boarding. This means that the installation diameter is fully retained and guarantees a secure fit.

  • Installation in Ø 68 – 80 mm openings
  • Maximum flexibility: Installation height from 100 – 40 mm
  • Independent of boarding material and thickness
  • Secure fit by means of installation on the ceiling
  • Use with all standard LV / HV / LED lamps

Examples of use

The spacer for installing luminaires in insulated hollow ceilings can be used in jointless false ceiling constructions made of chipboard,...

...MdF board,...

...in panelled ceilings with single battens...

...and suspended ceilings clad with plasterboard.

Spacer installation height from 100 to 40 mm and installation diameter from 68 to 80 mm

Mounting

Make cut opening (e.g. with cutter PROFI– Art. No. 1081-20).

Toolless breaking-off of the feet.

Setting the required height of 100 – 40 mm by breaking off the feet.

Pushing-on of the legs.

Four loops for secure cable routing.

Installation in Ø 68 – 80 mm openings.

Installation of the luminaire.

Housing stands securely on the ceiling boarding and creates the necessary spacing to the insulation.

Technical processing instructions / standards

  • use only certified (EN 60598) luminaires which are suitable for direct installation on normally flammable materials
  • When using the spacer and adjusting the installation height, the installation/application instructions of the luminaire used must be observed.
Download
Product data sheet

Spacer

Article no: 9310-10

Download
Brochure

Spacer

The solution for luminaire installation in insulated hollow ceilings.

323.3 KB | 2020-03-04

Instruction

Spacer

Assembly instructions

752.3 KB | 2024-12-04