UP¹ flush-mounting boxes

UP¹ ECON® Fix one-gang junction box

NEW
UP¹ ECON® Fix one-gang junction box
UP¹ ECON® Fix one-gang junction box
Preview: UP¹ ECON® Fix one-gang junction box Preview: UP¹ ECON® Fix one-gang junction box
   
UP¹ ECON® Fix one-gang junction box
  • 1555-26
  • 4013456587342
  • More volume than conventional one-gang boxes
  • With quick fixing for installation without plaster
  • With 4 x 3 screw domes and 2 expanding claw fields
  • Side-neutral combination
  • Many through-wiring possibilities
  • Standardised combination distance 71 mm
Depth
66 mm
Drill hole Ø
82 mm
With depth stop
Yes
With quick-fixing (also suitable for PU foam)
Yes
Screw spacing
60 mm
Number of screw domes
4 x 3
Splayed claw fields
2
Tool-free cable entries close to the floor up to Ø 11 mm in the combination area
2
Tool-free line and pipe entries in the combination range up to M25
2
Toolless cable entries up to Ø 11 mm on the box circumference
4
Toolless line and pipe entries up to M25 on the box circumference
4
Toolless cable entries up to Ø 11 mm in the bottom of the box
2
Toolless pipe entries up to M25 in the box bottom
2
Halogen-free
Yes
Air-tight
Yes
Packaging inner/dispatch
20/200
Product information

UP¹ flush-mounting boxes

UP¹, the new flush-mounting range for electrical installation, takes flush-mounting installation to a new level and makes it easier than ever before. 25% more installation volume compared to conventional flush-mounting one-gang junction boxes enables convenient accommodation of cables, connection terminals and installation accessories. The quick-fixing by means of ribs in all stones ensures up to 50% time savings during installation without plaster. The side-neutral and stable combination quickly allows multiple combinations to be created at a 71 mm centre distance. Thanks to open through-wiring and breakaway bridge, the device connection can be made without spatial separation. Accessories that are already wired, especially sockets, can therefore be installed particularly quickly and easily. The entries close to the base and through-wiring close to the base maximise the usable wiring space and facilitate the installation of the installation accessory due to the low-lying wiring material. Thanks to expanding claw fields and 4 x 3-fold screw domes, fixing the accessory is easier and more flexible than ever before. The new plaster compensation frame enables continuous plaster compensation from 10 to 35 mm with only one accessory.

  • 25% more volume compared to conventional flush-mounted one-gang junction boxes
  • Quick mounting in all wall constructions (ribs on the box, no mounting of accessories, use of PU foam is possible)
  • Stable and side-neutral combination
  • Open / diverse through-wiring
  • Fully insulated through-wiring close to the base for deep boxes
  • Entries close to the bottom of the box
  • Triple conduit feed M25 from one direction to one-gang and one-gang junction boxes
  • ECON® multi-cable conduit entries
  • 4 triple screw domes / expanding claw fields
  • Entries in the bottom of the box
  • Stepless plaster compensation (accessories)

Application examples

Vertically perforated bricks with and without filling, solid bricks.

Lightweight concrete.

Cellular concrete.

Lime sand brick.

Processing instructions

All UP¹ one-gang boxes offer generous installation space for convenient accommodation of cables, connection terminals and installation accessories.

Overlapping box diameters allow for a stable combination and open through-wiring.

After plastering, connecting accessories can be implemented in many different ways,...

...this makes it possible, for example, to insert the connecting cables of pre-wired accessories, such as sockets, quickly and easily without having to connect them in the boxes first.

Secure connection with the new side-neutral combination

The safe combination with the KAISER side-neutral combination: place the boxes together – no matter which way round – and press them together. Now you have a stable combination with 71 mm standardised combination distance.

No matter which way the boxes meet...

...put them together...

...and the boxes lock together stably.

Stable and side-neutral combination in 71 mm standardised combination distance.

Processing instructions – Entries

Due to entries being close to the base, the cable can be stowed directly on the base and take up little space.

Maximum usable space, thanks to fully insulated through-wiring close to the base.

Maximum flexibility thanks to three feeds up to M25 from one direction...

...e.g. next to door openings.

The UP¹ boxes also have entries in the base...

...2 entries each up to Ø 11 mm and 2 entries each up to Ø 25 mm with stiffening against pressure from expanding PU foam.

All cable and ECON® Multi-Membranes are labelled...

...this makes it easier to select the optimal entry.

Processing instructions for the ECON® Multi-Membrane

The toolless cable and conduit entries reduce installation time and make processing easier.

The elastic ECON® Multi-Membrane fits air-tight around the conduit or cable.

Each cable and conduit diameter up to Ø 25 mm can be installed quickly and air-tight.

Vertical draughts occur in hollow chamber blocks. The UP¹ boxes with ECON® technology prevent air exchange.

Processing instructions – Combination after plastering

After plastering, connecting accessories can be implemented in four different ways:

Classic connection in the middle area of the one-gang junction box...

...or by the fully insulated connection close to the base in the one-gang junction boxes,...

...without routing the cable in bends from one box to the other.

Moreover, in the case of permanently installed boxes, it is possible to break out the separator wall between the combined boxes in the upper area simply with a pair of combination pliers by means of a tilting movement...

...furthermore, the underlying ECON® Multi-Membrane can be additionally removed for even more wiring space.

This makes it possible to insert the connecting cables of pre-wired accessories, such as sockets, quickly and easily without having to connect them in the sockets first.

All UP¹ one-gang boxes offer generous installation space for convenient accommodation of cables, connection terminals and installation accessories.

Electrical installation

The signal bristles indicate the position of the boxes after plastering.

Open the boxes with one blow of the hammer.

Accessory fixing by means of: expanding claws or...

...4 x 3 screw domes for maximum flexibility.

Technical installation instructions

The quick-fixing of the UP¹ ECON® Fix boxes saves up to 50% installation time compared to the conventional installation of flush-mounting boxes with plaster. The box is securely fixed in the wall and held in position before plastering.

  • For fitting boxes without plaster
  • For all common bricks such as lime sand brick, cellular concrete, lightweight concrete, vertically perforated bricks with and without filling
  • Secure, clean and time-saving
  • Alignment and secure mounting even before plastering
  • Can also be used at sub-zero temperatures
  • By plastering the wall and allowing plaster to penetrate into the annular gap around the box, the box is permanently fixed in place
  • For thin plaster, remove the depth stop and additionally fix the boxes with flush-mounting gun foam
  • Not applicable when using clay plaster

Installation advantages – Installation without plaster

The UP¹ ECON® Fix family with rib fixing for mounting without plaster.

Fixing with ribs on several levels for secure fixing in all stones.

Depth stop to ensure the minimum plaster thickness.

The plaster penetrates between the box and the stone, ensuring that the box is securely and permanently fixed.

Installation – Installation without plaster

Make the installation opening Ø 82 mm with the diamond grinding head (Art. No. 1088-02).

Insert the UP¹ one-gang box or one-gang junction box with ribs.

Put on the signal cover (Art. No. 1181-65) and plaster the wall.

The penetration of the plaster between the box and the stone fixes the box securely and permanently.

Installation instructions – Installation with flush-mounting gun foam

Alternatively, the UP¹ ECON® Fix boxes can be fixed with flush-mounting gun foam (Art. No. 1155-95).

Make the installation opening Ø 82 mm with the diamond grinding head (Art. No. 1088-02).

Spray the wall with water...

...and insert the UP¹ one-gang box or one-gang junction box with ribs.

Pierce the TPE membrane in the centre of the bottom of the box...

...and foam-in the box.

If necessary, remove excess foam after curing so that plaster can still penetrate between the box and the stone.

Then fit signal cover (Art. No. 1181-65) ...

...and the wall is plastered.

The penetration of the plaster between the box and the stone fixes the box securely and permanently.

Technical information
Technical information

Sicherheitsdatenblatt UP-Pistolenschaum (Art.-Nr. 1155-95)

Download
Product data sheet

UP¹ ECON® Fix one-gang junction box

Article no: 1555-26

Download
Brochure

INNOVATIONS 2024

Centrepiece of every installation

Brochure

UP1. Our best UP flush-mounting box.

The new flush-mounting programme.

1.5 MB | 2023-08-31

Flyer

UP¹. Our best UP flush-mounting box.

685 KB | 2024-02-27

Instruction

UP¹ ECON® Fix

Assembly instructions

2.8 MB | 2023-09-05

Product recommendations