One-gang junction box ECON® Iso +

Article no: 1159-55
EAN: 4013456549302

for retrofitting in ETICS with wood fibre and rock wool insulation boards
for insulation thicknesses of 60 mm and upwards
4 swivelling cutters for secure mechanical fastening
4 screw domes
Sealing lip on all sides
including centering aid
including setting tool (Art. No.1090-22) per packaging unit

Depth

55 mm

for insulation thicknesses

> 60 mm

Cut hole Ø

68 mm

Device screws

Screw spacing

60 mm

Cable entries of up to Ø 11.5 mm

Conduit entries M20

Combination distance

71 mm

Support connectors for each package

Protection class

IP 30

Glow wire

850 °C

Halogen-free

Yes

Packaging inner/dispatch

10/100

Add to the project list

Download product data sheet (PDF)

Show additional downloads

One-gang junction box - ECON® Iso +

The ECON® Iso + one-gang junction box is the solution for electrical installation work in ETICS with wood fibre and rock wool insulation boards. Four swivels, specially designed for use in solid heat insulation and plaster base boards, ensure secure anchoring – also for retrofitting! The ECON® technology elastic sealing membrane guarantees air tightness and allows the toolless insertion of conduits or cables. This means that switches, sockets, intercoms and many more can be installed permanently and securely and heat bridge-free.

Air-tight and heat bridge-free electrical installation in accordance with DIN 18015-5 in ETICS
Suitable for wood fibre and rock wool ETICS from a gross density of 85kg/m³
Secure mechanical anchoring in the ETICS thanks to 4 swivelling cutting edges
Special cutter (Art. No. 1088-07) prevents damage to the cable
Making of combinations is possible

Examples of use

Suitable for installation in wood fibre...

...and rock wool insulation boards.

User-friendly mounting of the installation of accessories - also in combination - possible.

Ecological wall insulation in old and new buildings in both wood and solid constructions.

Processing instructions

Mounting in an unplastered insulation panel – use a mounting frame.

Mounting in a plastered insulation panel is possible, even with an existing cable.

The membrane which seals the swivel guarantees airtightness.

Plenty of entry options using ECON® technology for conduits and cables.

Mounting on unplastered insulation panel

Cut the Ø 68 mm installation opening using a suitable cutter (e. g. Art. No. 1082-30; countersink hole cutter and ejector spring must be removed).

Fit mounting frame, then feed the cable or conduit through the airtight membrane and into the box.

Using gentle pressure, insert the setting tool (Art. No. 1090-22) into the box as far as the stop. The swivels much expand completely.

Before plastering, fit the signal cover (Art. No. 1181-60). Protects the interior of the box, the screw domes and the screw heads.

Mounting on plastered insulation panel in a combination

Using SPECIAL cutter (Art. No. 1088-07) and two centering aids (Art. No. 1090-68), cut two installation openings at least 55 mm deep and with a diameter of 68 mm.