Results filtered according to:
No results were found for the filter!
Signal cover Ø 60 mm
- Reusable
- protects interior of box, screwing dome and screw heads when plastering
For installation opening: 60 mm
For one-gang boxes and one-gang junction boxes 60 mm Ø: Yes
One-gang junction box - ECON® Iso +
- Sealing lip on all sides
- 4 swivel cutters
- 4 screw domes
- with 2 device screws +/-
- including centering aid
- including setting tool (Art. No.1090-22) per packaging unit
Depth: 55 mm
for insulation thicknesses: > 60 mm
Cut hole Ø: 68 mm
Extension piece - 13mm - for junction box
Junction casings
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
Extension piece - 45mm - for junction box
International products
- For increasing the front-to-back depth of the box or for sub-ceiling insulation
- Multiple extensions possible
- With two fixing screws
In-wall back box 115 x 115 x 76 mm, quadratic glow wire tested 850ºC
International products
- Flat bearing surface thanks to 4 support points
- Voltage transfer is prevented by countersunk screw mounts
- Essential in timber construction
- Extension frame for sub-ceiling insulation available
In-wall back box 115 x 115 x 101 mm, quadratic glow wire tested 850ºC
International products
- Flat bearing surface thanks to 4 support points
- Voltage transfer is prevented by countersunk screw mounts
- Essential in timber construction
- Extension frame for sub-ceiling insulation available
Screw box, Lengths 15/25/40 mm
- suitable for fixing accessories and covers
- self-tapping Ø 3.2 mm
- corrosion-resistant in accordance with German DIN VDE standard
- RoHS-compliant
Length: 15, 25, 40 mm
Filled with device screws +/-, 100 of each: Yes
KLEMMFIX® for one-gang and one-gang junction boxes
- for the pre-fixing of flush-mounting boxes without plaster
- in openings made with a diamond grinding crown Ø 82 mm
- can be used with the UP-PLUS one-gang boxes 1055/1056-04 and one-gang junction boxes 1555/1556-04 as well as with the air-tight flush-mounting ECON® 10 1055/1056-21 one-gang boxes and ECON® 15 1555/1556-21 one-gang junction boxes
Cut hole Ø: 82 mm
With depth stop: Yes
Wall groove clip
- For laying cables or conduits without plaster
- Quick fixation in wall grooves from 20 to 55 mm
- Reduction of assembly time
- No damage to the cables
- Optional: use of steel nails Ø 3 mm
Length: 60 mm
Width: 40 mm
UP¹ ECON® Fix one-gang box
- More volume than conventional one-gang boxes
- With quick fixing for installation without plaster
- With 4 x 3 screw domes
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
Depth: 46 mm
Drill hole Ø: 82 mm
With depth stop: Yes
UP¹ ECON® Fix one-gang junction box
- More volume than conventional one-gang boxes
- With quick fixing for installation without plaster
- With 4 x 3 screw domes and 2 expanding claw fields
- Side-neutral combination
- Many through-wiring possibilities
- Standardised combination distance 71 mm
Depth: 66 mm
Drill hole Ø: 82 mm
With depth stop: Yes
Stepless plaster compensation frame UP¹
- To compensate for deep-seated boxes
- To maintain IP protection class
- With 2 fixing screws 40 mm
Height: 10 - 35 mm
Screw spacing: 60 mm
Steplessly adjustable: Yes