B² one-gang junction box for system magnet, depth 48.5 mm

Article no: 1262-06
EAN: 4013456552722

for in-factory installation
Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
1-piece
4 screw domes and 2 expanding claw fields for accessory fitting
Standardised combination distance 71 mm

Depth

48,5 mm

Installation opening Ø

60 mm

Markings for wires and cables up to Ø 16 mm

Break-out openings for DIN EN Ø 20/25 mm conduits

Dispatch

100

Add to the project list

Download product data sheet (PDF)

Show additional downloads

B² one-gang junction boxes

The new B² one-gang junction boxes for precast concrete offer plenty of space for terminals and cables thanks to their large volume and ease of assembly. The version with a slot for the system magnets (Art.-Nr. 1299-69) or system magnet PLUS (Art. No. 1299-70) is perfect for quick attachment to system magnets that have already been set automatically. Multiple combinations with a standardised combination distance of 71 mm can be created quickly and easily using the connection options on the side of the B² one-gang junction boxes. The separately available conduit connectors for toolless conduit connection prevent concrete from flowing in and, at the same time, dampen conduit vibrations during the compaction process.

For in-factory installation
Slot for system magnet (Art.-No. 1299-69) and system magnet PLUS (Art.-No. 1299-70)
4 screw domes and 2 expanding claw fields for accessory fitting
Standardised combination distance 71 mm
1-piece

Fixing variant

B² one-gang junction boxes with holder for KAISER system magnets (Art. No. 1299-69 / 1299-70).

B² one-gang junction boxes without plaster skin with holder for the magnet (Art. No. 1261-81).

B² one-gang junction boxes with plaster skin to hold the adhesive foil (Art. No. 1219-00)...

...or by means of hot glue.

Product advantages

The conduit connectors buffer the vibrations that occur between the conduit and the box during the compression process…

...and at the same time securely seal the connection in any position.

Combination of two B² one-gang junction boxes...

...fixed to the steel formwork using a system magnet.

Conduit connectors Ø 20/25 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.

Snap the conduit connector in to the one-gang junction box.

Press the conduit connector downwards and completely punch out the feed-through.

Insert the conduit into the conduit connector.

Conduit connectors Ø 32/40 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.

Insert the tip of the conduit connector in the marked position.

Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.

Snap-in the conduit connector, insert the conduit into the conduit connector.

Conduit connector 60° / diameter 25 mm

Snap the two halves of the 60° conduit connector together.

Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.

Insert the conduit in engaged conduit connector 60°.

3-unit combination with inserted conduits in the wall area.

Conduit transition coupling Ø 32 mm – Application examples

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32 mm.

Push the nose of the conduit transition coupling at the marking of the box and turn it with pressure against the B² one-gang junction box until the feed-through is cut out.

The conduit transition coupling directs the inner diameter of the conduit unrestricted into the B² one-gang junction boxes Art. No. 1262-XX and 1263-XX...

...and thus enables the secure conduit connection of two Ø 32 mm conduits from one direction.

One system magnet for all applications.

The system magnet is suitable for all installation parts required in wall and ceiling production to prepare the electrical installation in-factory. The system magnet can be used for correct positioning in both manual and automated production. In automated production, the magnet can be placed on the formwork table automatically and in the correct position using the multifunction gripper. The PLUS system magnet can also be removed and magazined automatically.