B¹ Prefix® system wing bracket set

Article no: 1211-00
EAN: 4013456551367

Facilitates fixing to the reinforcement
Pre-fixing by means of B¹ Prefix® installation technology
Can be used for the following articles:
B¹ device socket
B¹ device connection socket
B¹ large-conduit device connection socket
B¹ electronics socket
B¹ two-device connection socket
B¹ wall light connection socket
B¹ universal wall outlet
B¹ Prefix® adapter - Ø 20, Ø 25 and Ø 32 mm

Material

PE-HD

Length

103 mm

Width

49 mm

Depth

36 mm

For concrete coverings of

20 - 60 mm

Number of wings

Packaging inner/dispatch

1/175

Add to the project list

Download product data sheet (PDF)

Show additional downloads

B¹ Prefix® wall outlet adapter

Using the B¹ Prefix® wall outlet adapter, end and transition grommets, and wall and ceiling 30°-elbows, can be easily and quickly fixed to the reinforcement for pressing against the (not yet placed) front formwork. They have two strong attachment slots, on opposite sides, for clicking the new Prefix® system wing brackets into place.

Fast and easy installation on opposing formwork without support element and abutment
For installation in exposed concrete, pressed against the front formwork

Examples of use

The B¹ Prefix® wall outlet adapter of the required size (Ø 20 mm, Ø 25 mm or Ø 32 mm) is simply snapped into place between the front and rear parts.

The B¹ Prefix® system wing brackets are now attached to the Prefix® wall outlet adapter in such a way that the planned concrete cover to the reinforcement will be achieved.

Pre-fix the wall outlet easily and quickly to the reinforcement using the Prefix® installation technology..

...and quickly tie it securely to the reinforcement, using both hands.

Installation to the opposing formwork side using B1 Prefix® system wings

Prepared working formwork with reinforcement from the opposing formwork side.

Now the B1 Prefix® system wings are inserted from behind into the slots located on the box body,...

...the planned concrete cover of the reinforcement must be taken into account here. The B1 Prefix® system wings..

...can be used for concrete coverings 20 - 40 mm and 40 - 60 mm.

All B1 wall applications can be pre-fixed quickly and easily to the reinforcement using Prefix® installation technology...

...and final fixing is done using tie wires. The one-gang box attached to the reinforcement should protrude 5 - 20 mm beyond the planned wall thickness after installation.

With the new B1 Prefix® wall exit adapter, the Ø 20 mm, Ø 25 mm and Ø 32 mm wall exits can now also be...

...installed easily to the opposing formwork side using Prefix® installation technology.