One-gang junction box for solid wood

One-gang junction box for solid wood

One-gang junction box for solid wood
  • 9274-22
  • 4013456588998
  • Rib fastening for installation in cross-laminated timber or laminated timber walls or in solid wood panels
  • Innovative cable entries positioned on the side of the box circumference
  • 4 screw domes
  • Toolless opening of the cable entries using an opening tab
  • Fully insulated through-wiring for combinations using support connectors
  • including setting tool (Art. No. 1090-12) per packaging unit
Depth
60 mm
Cut hole Ø
74 mm
Screw spacing
60 mm
Number of screw domes
4
Cable entries of up to Ø 11.5 mm
8
Support connectors for each package
7
Combination distance by simply removing the pre-embossed edge
71 mm
Packaging inner/dispatch
25/250
Product information

One-gang junction box for solid wood

The new one-gang junction box for solid wood makes installation in solid wood walls much quicker, easier and more efficient thanks to lug-free rib fastening. Thanks to the innovative cable entries, which enable toolless installation, even out-of-direction drill holes for cable routing in the solid wood element can be effortlessly levelled out and guarantee clean installation in the installation opening, even in visible wood quality. The centring bars and the centre markings on the holding ring and on the first row of ribs enable precise and convenient alignment of the one-gang junction box in the installation opening without tilting.

  • Clamping rib fastening for installation in solid wood walls
  • Innovative cable entries enable maximum tolerance compensation for out-of-direction drill holes for the cable route
  • Four screw domes for maximum flexibility for accessory fitting
  • Eight toolless cable entries
  • Device screws with plus-minus drive

Application examples

Ideally suited for installation in solid wood elements with visible wood quality.

For directly opposing installation in walls from 120 mm overall thickness.

Fully insulated connection for two- to five-fold box combinations by means of support connectors (Art. No. 9060-88).

Firm hold thanks to the rib fastening, even with subsequent boarding (e.g. gypsum plasterboard).

Processing instructions

Toolless cable entries up to Ø 11.5 mm.

The innovative cable entries ideally compensate for out-of-direction drill holes and ensure an optimum cable connection to the box.

For multiple combinations with a standard centre distance of 71 mm, the retaining edge is simply cut (e.g. using a cutter knife).

The box is simply pressed into the Ø 74 mm installation opening of the solid wood wall using the setting tool (Art. No. 1090-12).

Installation

Create the exact installation opening Ø 74 mm, for multiple combinations at the standardised centre distance of 71 mm.

Open the toolless cable entries and insert the cables up to Ø 11.5 mm.

Align the box for exact positioning using the centre markings on the holding ring and on the first row of ribs.

When installing the box, the cables press into the membrane from the outside so that the box can be guided into the installation opening.

The box is simply pressed into the Ø 74 mm installation opening of the solid wood wall using the setting tool (Art. No. 1090-12).

For fully insulated connection in multiple combinations, the support connector (Art. No. 9060-88) is inserted into the open cable entry.

The connecting cables are then fed through the support connector.

Fasten the installation accessory using the device screws.

Download
Product data sheet

One-gang junction box for solid wood

Article no: 9274-22

Download
Brochure

INNOVATIONS 2024/2025

Centrepiece of every installation

4.2 MB | 2024-03-05

Flyer

Electrical installations in solid wood walls.

For cavity walls and fire protection.

Instruction

One-gang junction box for solid wood

Assembly instructions, Art. No. 9274-22

898.8 KB | 2024-03-06

Accessories