Telescope equipment carrier and switch box

Telescope switch box

Telescope switch box
Preview: Telescope switch box
Telescope switch box
  • 1159-61
  • 4013456537057
  • for secure fixing of sockets and much more
  • for use with external insulation of walls and ceilings
  • with 2 screw domes
  • Standardised combination distance 71 mm
Insulation thickness
80 - 200 mm
Depth
50 mm
Length
68 mm
Width
70 mm
Screw spacing
60 mm
Conduit entry M20 on the carrier
2
Cable entries up to Ø 16 mm
2
Halogen-free
Yes
Dispatch
10
Product information

Telescope equipment carrier and switch box

For the safe installation of luminaires, motion detectors and many other accessories in and on insulated facades. Optimised for the latest insulation thicknesses, the telescopic products permit a wide range of applications in external faces with insulation thicknesses from 80 to 200 mm. The two conduit entries on the basic carrier guarantee secure conduit connection. The cable routing which is integrated in the carrier arm ensures a fast, easy cable pull-in.

  • Stable fit to walls and ceilings
  • For insulation thicknesses from 80 to 200 mm
  • Equipment carriers for accessories up to max. 5 kg
  • One-gang boxes can be combined with a standardised 71 mm combination distance
  • Conduit entries on the carrier with internal cable routing
  • Integrated indicated dimension allows easy cutting off to insulation thickness
  • Front fixing and depth stop prevent incorrect installation
  • Front fixing of the mounting plate/one-gang box

Examples of use

Heat bridge calculation / weight-bearing load

A heat bridge analysis produced by the Passivhaus Institut Dr. Feist, Darmstadt, showed that heat conductivity is only changed to a negligible extent and consequently it is demonstrated that no heat bridges result. When the space between the basic carrier and mounting plate / one-gang box is filled with insulating material, the loss coefficient "x WB" for the telescope equipment carrier is 0.0085 W/K, and 0.0077 W/K for the telescope switch box.

Telescope equipment carrier

Telescope switch box

When fitting an equipment carrier to a wall, ensure that the cable entries are positioned vertically.

Installing the basic carrier

Prepare the cable routes. Try to avoid direct cable routing through masonry and insulation.

The internal cable routing can easily be broken off to permit cable routing from the rear.

Saw the carrier to the required length. The integrated indicated dimension ensures exact reading of the dimension.

Slotted holes allow precise alignment even when the drill holes are not exact.

Installing the equipment carrier

Push the one-gang box onto the supporting arm as far as the stop.

The front fixing and the depth stop always ensure exact fitting and prevent incorrect installation.

Side fixings allow the secure positioning of several equipment carriers next to each other…

…and stable installation for accessories when the attachment points are far apart.

Installing the one-gang box

Push the one-gang box onto the supporting arm as far as the stop.

The front fixing and the depth stop always ensure exact fitting and prevent incorrect installation.

For multiple combinations, cut out the side separator walls and connect the one-gang boxes.

For multiple combinations, cut out the side separator walls and connect the one-gang boxes.

Product advantages

Dimensions shown on the carrier ensure that the carrier length can easily be sawn off to match the insulation thickness – no need for measuring!

Slotted holes allow precise alignment even when the drill holes are not exact.

The two conduit entries on the carrier guarantee secure conduit support. The integrated cable routing ensures fast, easy cable insertion.

Luminaires and many other accessories are easily fitted in the mounting plate through the plaster using screws up to 4 mm Ø.

Front fixing of telescope equipment carrier and box

Certificates
Certificate

Teleskop-Geräteträger - Wärmebrückenberechnung

Download
Product data sheet

Telescope switch box

Article no: 1159-61

Download
Brochure

Energy efficiency.

Electrical installation for energy-saving buildings.

6.8 MB | 2024-02-28

Flyer

Herzstück jeder Installation. - Die KAISER-Dose.

Flyer

Telescope equipment carrier and switch box

For secure attachment of accessories to insulated facades.

6.3 MB | 2018-02-02

Instruction

Telescope equipment carrier, switch box and combination one-gang box

Assembly instructions

1.3 MB | 2018-01-26

Accessories