KompaX® 1 concrete installation housing

KompaX®1 housing for slab ceilings

KompaX®1 housing for slab ceilings
Preview: KompaX®1 housing for slab ceilings
KompaX®1 housing for slab ceilings
  • 1293-15
  • 4013456330993
  • for factory fitting
  • installation height for built-in luminaires or loudspeakers max. 100 mm
  • consists of front part, fitted mounting ring and rear part
  • for ceilings of 18 cm total thickness upwards
  • incl. support elements for installation heights 100/150/200 mm
Length
585 mm
Width
440 mm
Depth
131 mm
Ceiling exit (CE) Ø
0-300 mm
LED wattage max.
45 Watt
Lamp wattage max.
90 Watt
Dispatch
5
Product information

KompaX® 1 concrete installation housing

KompaX® 1 housing system for fitted downlights and loudspeakers in concrete ceilings with wide range of accessories for almost all applications. Height-adjustable using intermediate frames. The various front parts make it extremely practical.

  • Housing system for fitted downlights and loudspeakers
  • For in-situ or prefabricated concrete
  • For precise installation openings from Ø 160–300 mm
  • For device installation depths up to 200 mm*
  • For ceiling thicknesses from 180–300 mm*
  • Tolerance compensation during slab ceiling installation
  • incl. support elements for installation heights 100/150/200 mm

Technical processing instructions/standards

  • for ceiling thicknesses from 18 up to 30 cm. Please contact us if the ceiling thickness is greater than 30 cm.
  • use only certified (EN 60598) luminaires which are suitable for direct installation on normally flammable materials
  • luminaire installation heights up to 200 mm; please contact us for heights greater than 200 mm
  • allows installation of additional lighting or loudspeaker accessories, EIB components, emergency supply units, etc.

Luminaire selection

Built-in installation downlights with TC lamps, lamp output max. 90 W* (e.g. 3 x TC-D 26 W or 2 x TC-T 42 W). Use only built-in luminaires tested to EN 60598-1 suitable for installation on normally flammable building materials. Luminaire installation depth without intermediate frame max. 100 mm. Luminaire installation depth with intermediate frame max. 200 mm. (*Even higher system performance is possible with an intermediate frame)

Note

*For installation depths > 200 mm and ceiling thicknesses > 300 mm, please contact us. Telephone: +49 (0)2355.809.61

Download
Product data sheet

KompaX®1 housing for slab ceilings

Article no: 1293-15

Download
Instruction

KompaX® 1 and 2

Assembly instructions

1 MB | 2018-01-30

Accessories