Installation housing ThermoX® Iso +

Extension element for ThermoX® Iso +

Extension element for ThermoX® Iso +
Preview: Extension element for ThermoX® Iso +
Extension element for ThermoX® Iso +
  • 1159-71
  • 4013456548190
  • for installation housing for external insulation
  • for insulation thicknesses 170 - 350 mm
  • Adjustment to the insulation thickness in 10 mm steps.
Length
220 mm
Width
110 mm
Height
190 mm
Insulation thickness in combination with Art. No. 1159-70
170 - 350 mm
Halogen-free
Yes
Dispatch
6
Product information

Installation housing ThermoX® Iso +

Installation housing for the secure and heat-bridge-free installation of rigid and swivelling built-in LED luminaires or other installation accessories in insulated ceilings. The housing protects the surrounding insulation material against the high operating temperatures of the LED luminaire and protects the LED luminaire itself against dirt. The integrated insulation element reliably prevents heat bridges.

  • For the installation of luminaires and installation accessories in insulated ceilings
  • Suitable for all standard insulation materials
  • Thermically-protected installation space
  • The integrated insulation element prevents heat bridges
  • For insulation thicknesses from 100 mm to 160 mm (170 mm to 350 mm with extension element)
  • Adjustment to the insulation thickness in 10 mm steps.
  • Installation diameter up to ø 86 mm

Examples of use

Buildings are constructed heat-bridge-free using the ETICS composite thermal insulation systems, e.g. …

…insulated external ceilings of built-over terraces with lighting.

…insulated, recessed entrance areas with lighting.

…insulated facades with outdoor lighting over the entrance and garage door.

Heat-bridge calculation / temperature profile

A heat bridge calculation by the Passivhaus Institut, Darmstadt, shows that heat bridges can be reliably prevented by the installation housing for the external insulation. The installation housing is also suitable for use in passive houses.

Installation

Adapt installation housing to the measured insulation thickness.

Mark fixing point 55 mm from the luminaire centre point.

Alternative: Position the installation housing with the alignment markings for the luminaire and mark the drill hole.

Break out the conduit entry or cut an exact cable entry for air-tight installation, e.g. by using the KAISER universal opening cutter (Art. No. 1085-80).

Screw installation housing to the ceiling and fit the screw covering.

Insert the conduit or cable into the installation housing; fit sealing plug to the conduit.

Ceiling exit ø 68 mm for knocking in, ceiling outlet up to ø 86 mm for cutting out.

Applying insulation and plaster. Fitting the LED installation spotlight with plenty of space for the ballast device.

Processing instructions

Universal front part for installation diameter of ø 68 mm for knocking in or universal up to ø 86 mm for cutting out (turn by 180°).

Installation depth 70 mm (insulation thickness 100 mm).

Installation depth 100 mm (insulation thickness 130 mm).

Installation depth 130 mm (insulation thickness 160 mm).

Download
Product data sheet

Extension element for ThermoX® Iso +

Article no: 1159-71

Download
Brochure

Energy efficiency.

Electrical installation for energy-saving buildings.

6.8 MB | 2024-02-28

Flyer

Installation housing ThermoX® Iso +

For built-in LED luminaires and installation accessories in insulated ceilings.

990.3 KB | 2018-02-02

Instruction

Installation housing ThermoX® Iso +

Assembly instructions

2.6 MB | 2018-01-29

Product recommendations