Plaster-free installation with KLEMMFIX®

KLEMMFIX® for one-gang and one-gang junction boxes

KLEMMFIX® for one-gang and one-gang junction boxes
  • 1159-03
  • 4013456551503
  • for the pre-fixing of flush-mounting boxes without plaster
  • in openings made with a diamond grinding crown Ø 82 mm
  • can be used with the UP-PLUS one-gang boxes 1055/1056-04 and one-gang junction boxes 1555/1556-04 as well as with the air-tight flush-mounting ECON® 10 1055/1056-21 one-gang boxes and ECON® 15 1555/1556-21 one-gang junction boxes
Cut hole Ø
82 mm
With depth stop
Yes
Packaging inner/dispatch
25/250
Product information

Plaster-free installation with KLEMMFIX®

The KLEMMFIX® system saves up to 50% installation time compared to the conventional installation of flush-mounting boxes with plaster. KLEMMFIX® fixes the box securely in the wall before plastering and holds it in position. No plaster, quick cement or similar is required. You no longer need to clean your tools after use. The possible health hazard caused by the use of chemicals is avoided. Storage conditions such as frost, heat, shelf life, etc. do not have to be taken into account either.

  • For fitting boxes without plaster
  • For all common bricks such as lime sand brick, cellular concrete, lightweight concrete, vertically perforated bricks with and without filling
  • Secure, clean and time-saving
  • Alignment and secure mounting even before plastering
  • Can also be used at sub-zero temperatures
  • By plastering the wall and allowing the plaster to penetrate into the lamella ring around the box, the box is finally and permanently fixed.
  • Not applicable when using clay or thin plaster

Examples of use

Vertically perforated bricks with and without filling, solid bricks.

Light concrete.

Cellular concrete.

Lime sand brick.

Processing instructions

Fastening with lamellar ring and clamping ribs on several levels for secure fixation in all common bricks.

Depth stop to ensure minimum plaster thickness.

Designed for precisely fitting use with the KAISER flush-mounted boxes.

The plaster penetrates up to the lamellar ring and thus ensures that the box is securely and permanently fixed.

Installation

Make the installation opening Ø 82 mm with the diamond grinding crown (Art. No. 1088-02).

Push in box with KLEMMFIX® latched on.

Fit signal cover (Art. No. 1181-60).

The fine marker bristles of the signal cover indicate the exact position of the one-gang box after plastering.

Proof of stability:

Tests carried out show that all boxes remain unchanged. Long-term use in practice confirms this result. Deviations in plastering material and application of the plaster have no effect.

Plaster-free installation with KLEMMFIX®

The most important features at a glance.

1 Occurring forces are transferred to the Klemmfix®. The box stays in shape. | 2 Fastening with lamellar ring and clamping ribs on several levels for secure fixation in all common bricks. | 3 Forces that occur are diverted to the flush-mounted boxes.

KLEMMFIX® system

KLEMMFIX® fixes the box securely in the wall before plastering and holds it in position. The subsequently applied plaster penetrates up to the lamella ring and thus ensures the secure and permanent fixing of the box.

Download
Product data sheet

KLEMMFIX® for one-gang and one-gang junction boxes

Article no: 1159-03

Download
Flyer

Herzstück jeder Installation. - Die KAISER-Dose.

Flyer

KLEMMFIX®

You can forget about plastering.

2.5 MB | 2021-03-15

Instruction

KLEMMFIX®

Assembly instructions

3.4 MB | 2021-03-15