Universal installation housings

Universal installation housing with mineral fibreboard

Universal installation housing with mineral fibreboard
Preview: Universal installation housing with mineral fibreboard

Universal installation housing with mineral fibreboard

  • 1224-22
  • 4013456490024
  • 2-part, consisting of housing and front ring with mineral fibreboard
  • all-round groove denotes the maximum opening dimension
  • for loudspeakers, displays and LED lamps
Length
150 mm
Width
90 mm
Depth
70 mm
Installation opening
100 x 40 mm
Device installation depth
60 mm
Ceiling thickness
>= 140 mm
Wall thickness
>= 110 mm
suitable for vertical formwork
suitable for horizontal formwork
Dispatch
10
Price/100 ST
1,250.00€
Price group
130

Universal installation housings

Universal installation housing for the installation of almost any types and shapes of accessories in concrete walls and ceilings. The housing system consists of nine different installation housings and an extensive range of accessories.

  • For displays, LED lamps and much more
  • For installing almost all shapes and sizes
  • For installation on walls and ceilings
  • For on-site mixed concrete and prefabrication
  • For horizontal and vertical formwork and masonry
  • for ceiling thicknesses of 140 mm and higher
  • for wall thicknesses of 110 mm and higher

Examples of use

The housing in the concrete is flush-mounted with the mineral fibreboard. The groove in the mineral fibreboard determines the maximum fitting area.

The support in the installation housing prevents it being pressed inward while the concrete is being cast.

Use only screws that go into but not through the mineral fibreboard when attaching the device (e.g. SPAX countersunk head screw 3.5 x 15 mm)!

The front panels are easy to process, and almost any shape can be cut out.

Note

The listed wall thickness refers to walls without a fire-protection function. For fire-protection walls: remaining wall thickness = min. 60 mm. For use with halogen luminaires, note maximum output (see product details)

Adjusting the telescope support to different wall thicknesses

Wall thickness up to 20 cm. Shorten the 8-sided conduit on base and supporting plate to the necessary length. Wall thickness 20 to 25 cm. Adjust the telescope support to the necessary length.

Wall thickness 25 to 30 cm. Fit the included extension and adjust the telescope support to the necessary length.

Note

When the formwork is closed, the telescope support and the casing are held between the walls of the formwork. The preset excess length of 2 cm ensures sufficient pressure for a secure fit. Always tighten hose clamp fully!

Product data sheet

Universal installation housing with mineral fibreboard

Order number: 1224-22

Download