B¹ Prefix® system wings

B¹ Prefix® system wing bracket set

B¹ Prefix® system wing bracket set
Preview: B¹ Prefix® system wing bracket set
B¹ Prefix® system wing bracket set
  • 1211-00
  • 4013456551367
  • Facilitates fixing to the reinforcement
  • Pre-fixing by means of B¹ Prefix® installation technology
  • Can be used for the following articles:
  • B¹ device socket
  • B¹ device connection socket
  • B¹ large-conduit device connection socket
  • B¹ electronics socket
  • B¹ two-device connection socket
  • B¹ wall light connection socket
  • B¹ universal wall outlet
  • B¹ Prefix® adapter - Ø 20, Ø 25 and Ø 32 mm
Length
103 mm
Width
49 mm
Depth
36 mm
For concrete coverings of
20 - 60 mm
Number of wings
2
Packaging inner/dispatch
1/175
Product information

B¹ Prefix® system wings

The B¹ Prefix® system wing allows fast, easy fixing to the reinforcement. This means optimal installation on the opposing formwork side and for free-standing reinforcement, and also for sliding or travelling formwork constructions. All wall applications in the new B¹ range have slots for the locking of two Prefix® system wings. This ensures fast, easy installation on the opposing formwork side.

  • Fast and easy installation on opposing formwork without support element and abutment
  • Holding in place using the Prefix® installation technology leaves both hands free for securing with tie wires
  • A pronounced corrugated profile and additional fixing opportunities for secure fixing using tie wires
  • Combinable when using wall and ceiling transitions
  • For installation in exposed concrete, pressed against the front formwork
  • Suitable for 20 - 60 mm concrete covers

Installation to the opposing formwork side using B1 Prefix® system wings

Prepared working formwork with reinforcement from the opposing formwork side.

Now the B1 Prefix® system wings are inserted from behind into the slots located on the box body,...

...the planned concrete cover of the reinforcement must be taken into account here. The B1 Prefix® system wings..

...can be used for concrete coverings 20 - 40 mm and 40 - 60 mm.

All B1 wall applications can be pre-fixed quickly and easily to the reinforcement using Prefix® installation technology...

...and final fixing is done using tie wires. The one-gang box attached to the reinforcement should protrude 5 - 20 mm beyond the planned wall thickness after installation.

With the new B1 Prefix® wall exit adapter, the Ø 20 mm, Ø 25 mm and Ø 32 mm wall exits can now also be...

...installed easily to the opposing formwork side using Prefix® installation technology.

B¹ two-gang junction box with Prefix® installation technology.

Electronic box with Prefix® installation technology.

B¹ Universal wall exit with Prefix® installation technology.

B¹ Prefix® wall exit adapter with Prefix® installation technology.

1 Wall and ceiling elbow 30° | 2 B¹ Prefix® system wings | 3 B¹ Prefix® wall outlet adapter

Download
Product data sheet

B¹ Prefix® system wing bracket set

Article no: 1211-00

Download
Brochure

Electrical installation in on-site mixed concrete.

Boxes, housings and systems.

14.7 MB | 2024-02-28

Flyer

Herzstück jeder Installation. - Die KAISER-Dose.

Flyer

QUICK-INFO - B1 The new standard in on-site mixed concrete.

2.6 MB | 2021-04-16

Select download
Flyer

Concrete construction - B1 comparison list

Simple assignment of the new "B1 program" to the previous concrete construction program.

545.1 KB | 2021-01-13

Instruction

Concrete construction B¹

Assembly instructions

7.4 MB | 2023-07-24