B² one-gang junction boxes

B² one-gang junction box with plaster skin, depth 83.5 mm

B² one-gang junction box with plaster skin, depth 83.5 mm
Preview: B² one-gang junction box with plaster skin, depth 83.5 mm
B² one-gang junction box with plaster skin, depth 83.5 mm
  • 1264-60
  • 4013456480766
  • for in-factory installation
  • Fastening to the formwork by means of KAISER adhesive foil (Art. No. 1219-00) or hot glue
  • 4 screw domes and 2 expanding claw fields for accessory fitting
  • Standardised combination distance 71 mm
  • 1-piece
Depth
83,5 mm
Installation opening Ø
60 mm
Markings for wires and cables up to Ø 16 mm
2
Break-out openings for DIN EN Ø 32/40 mm conduits
4
Dispatch
100
Product information

B² one-gang junction boxes

B² system for installation in horizontal precast concrete. All installation requirements can be met with just a few components. The one-gang boxes are self-adhesive and the accessories provide a practical product range.

  • Extremely time-saving
  • One-piece design
  • Available with or without plaster skin
  • Available prefabricated with special glue – no adhesive residues when removing formwork
  • Simple connectors for combinations or opposing boxes

Fixing options

B² one-gang junction boxes with receptacle for KAISER system magnets Art. No. 1299-69.

B² one-gang junction boxes without plaster skin to accommodate the KAISER B² magnets Art. No. 1261-81.

B² one-gang junction boxes with plaster skin for fastening by means of KAISER adhesive foil Art. No. 1219-00...

...or by means of hot glue.

Conduit connectors Ø 20/25 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 20/25 mm.

Snap the conduit connector in to the one-gang junction box.

Press the conduit connector downwards and completely punch out the feed-through.

Insert the conduit into the conduit connector.

Conduit connectors Ø 32/40 mm

With built-in conduit lock designed especially for corrugated conduits with a diameter of 32/40 mm.

Insert the tip of the conduit connector in the marked position.

Turn the conduit connector with pressure against the one-gang junction box until the feed-through is cut out.

Snap-in the conduit connector, insert the conduit into the conduit connector.

Conduit connector 60° / diameter 25 mm

Snap the two halves of the 60° conduit connector together.

Pierce the tip of the 60° conduit connector at the desired conduit entry and turn until the feed-through is cut out.

Insert the conduit in engaged conduit connector 60°.

3-unit combination with inserted conduits in the wall area.

Certificates
Certificate

Concrete construction boxes - Sound insulation certificate

Download
Product data sheet

B² one-gang junction box with plaster skin, depth 83.5 mm

Article no: 1264-60

Download
Brochure

Electrical installation in concrete construction precast concrete production and prefabricated room modules.

Boxes, housings and systems.

Brochure

Electrical installation in on-site mixed concrete.

Boxes, housings and systems.

14.7 MB | 2024-02-28

Flyer

B² conduit couplings

Process reduction in precast concrete.

Performance declaration

Declaration of conformity

Accessory box including accessories.

57.9 KB | 2019-12-19