VARIOCUT universal hole cutter for cavity wall building materials

Article no: 1089-00
EAN: 4013456448919

with hardened metal cutter inserts for cavity wall materials
Vacuum cleaner hose attachments from Ø 31 - 36 mm
including twist drill 6 mm

Cut hole Ø

65 - 120 mm

Depth of cutting hole

45 mm

Dispatch

Add to the project list

Download product data sheet (PDF)

Show additional downloads

VARIOCUT

VARIOCUT universal hole cutter for clean circular cut-outs in cavity wall and ceiling materials. The hardened metal cutter inserts can cut variable openings with a cutting depth of 45 mm.

Making clean circular cut-outs using protective cover with dust extractor
For light installation openings and circular cut-outs Ø 65 - 120 mm in diameter
Continuously adjustable cutter inserts
centering cutter aid making it secure to guide the centering drill

Art. No. 1089-00
for frontal fitting of ThermoX® Arti. No. 9300-01/-02/-03/-22
for cavity wall junction box Art. No. 9073-01/-77/-78/-91

Operation

Set and lock required diameter and prescribed cutting depth.

Mark the centre point for drilling (use centering cutter if necessary). Set appropriate speed on electric drill. Pre-drill plates to Ø 6 mm before cutting.

Use VARIOCUT centering drill. Start drilling, push the protective cover down flat on the surface and cut opening applying light pressure.

As soon as a hole has been drilled, turn off the electric drill immediately. Wait until the machine has fully stopped before removing the VARIOCUT and removing the cut-out material.